How to Fix a Broken Bike Chain Without Bike Tool in 6 Steps

If you don’t have a bike tool to fix your broken bike chain, don’t worry! You can still fix it without one. Here’s how:

1. Find the break in the chain and remove any debris that may be caught in it. 2. Using two flathead screws, tighten the loose link until it is snug against the adjacent links. 3. Trim off any excess chain with wire cutters or a sharp knife.

Be careful not to cut into any of the other links. 4. Reattach the chain to the bike and test it out to make sure it’s working properly before going on your ride. 5. If the chain breaks again, repeat steps 1-4 until it stays together.

6. Once you’ve got the hang of it, fixing a broken bike chain without a bike tool is easy!

  • Look at the chain to see if there are any broken or bent links
  • If so, use a chain tool to remove the damaged link and reattach the chain
  • If the chain is not severely damaged, try gently bending it back into shape with your hands
  • Use a chain tool to shorten the chain by one link
  • This will take up the slack and allow you to reattach it without needing a bike tool
  • Reattach the chain using a master link, or by threading it through the derailleur and around the cassette cog set
  • Make sure that all of the links are seated properly before tightening everything down
  • Once everything is reconnected, use your hands to pedal backwards and help guide the chain back onto all of the cogs correctly
  • Test ride your bike to make sure that everything shifts smoothly before heading out on your journey!

How to REMOVE A BIKE CHAIN without special tools (don’t do this to your triathlon bike)

Can You Fix a Bike Chain Without Tools?

If your bike chain has come off and you don’t have any tools with you, don’t worry! You can still fix it without any tools. Here’s how:

First, find a rock or a hard surface that you can use to rest the bike on. This will give you something to brace against when you’re working on the chain. Next, locate the master link – this is the link that allows you to remove or add links from the chain.

If your chain doesn’t have a master link, then any link will do. Using your fingers or a flat object like a coin, push the pins out of the master link (or chosenlink). Once both pins are out, the link should come apart easily.

Now it’s time to reattach the chain. First, feed one end of the chain through the frame of the bike until it comes out at the other end. Then takethe master link (or chosenlink) and line up the holes in each side.

Pushthe pins back in until they’re flush withthe surface ofthe link – be careful notto push them allthe way through! Once both pins are in place, gently tug onthechain to make sure thatit’s secure before getting back onyourbike and riding away!

How Do You Break a Bike Chain Without the Tool?

If you don’t have the tool to break a bike chain, there are still a few ways that you can do it. The first way is by using a pair of pliers. You’ll need to find the weakest link in the chain and then use the pliers to bend it until it breaks.

Another way to break a bike chain without the tool is by using a hammer. Again, you’ll need to find the weakest link in the chain and then hit it with the hammer until it breaks. This method is definitely more brute force and isn’t as precise as using pliers, but it will get the job done if you’re in a pinch.

The last way to break a bike chain without the tool is by using your hands. This method is similar to using a Hammer, but instead of hitting the chain with a hammer, you’re going to pull on it until it snaps. This method takes some time and effort, but if you’re patient, you can get your bike chain off without having to use any tools at all.

How Do I Fix a Broken Bike Chain?

If your bike chain has come off, or broken, then you’ll need to fix it before you can ride again. Don’t worry, it’s not as difficult as it sounds. Here’s a step-by-step guide to help you get back on the road in no time.

1. First, you’ll need to remove the broken chain from your bike. If it’s a derailleur chain, then you can simply unhook it from the derailleur. If it’s a BMX or single speed chain, then you’ll need to use a chain tool to remove the link that has broken.

2. Once the broken chain is removed, take a look at the links and identify which one is damaged or missing entirely. 3. If there is only minor damage to a link (such as a bent pin), then you may be able to simply bend it back into shape with pliers. However, if there is more significant damage (such as a cracked link), then you will need to replace that link with a new one.

You can buy replacement links at most bike stores, or online. 4 . To attach the new link (or repair an existing one), first thread one end of the chain through itself so that it forms a loop.

Then use your fingers or pliers to insert the new link into place – make sure that the open ends of the link are facing in opposite directions! – and gently squeeze the ends together until they snap closed. Voila!

Your bike chain is fixed!

How Do You Fix Your Chain If It Breaks?

If your chain breaks, it is important to fix it as soon as possible. Depending on the severity of the break, there are different ways to fix it. For a small break, you can use a chain rivet or a quick link.

For a more serious break, you will need to remove the broken link and insert a new one. To do this, you will need a chain tool. First, remove the master link or any other connecting links.

Next, use the chain tool to push out the pin that holds the broken link together. Once the pin is removed, you can slide the broken link off and replace it with a new one. Finally, use the chain tool to put the new pin back in place.

How to Fix a Broken Bike Chain Without Bike Tool in 6 Steps


How to Take Chain off Bike Without Tool

Assuming you don’t have a quick link: 1. Thread the chain through the rear derailleur. 2. Lift the chain off the largest cog in the back and let it dangle.

3. Pedal backwards until the chain is on the smallest cog in the back. 4. Lift the chain off of the rear derailleur entirely. 5. The chain is now off!

How to Take off a Bike Chain Without Breaking It

If you’ve ever had to take your bike chain off, you know it can be a bit of a pain. There are a few things you need to do in order to avoid breaking the chain. Here’s how to take off a bike chain without breaking it:

1. First, remove the master link. This is the link that connects the two ends of the chain together. To do this, simply unscrew the master link and slide it out of place.

2. Next, use a chain tool to push one of the pins out of the innermost side plate. You’ll need to push from the inside of the plate in order for it to come out all the way. 3. Repeat step two on the other side plate.

Now you should be able to pull thechain apart at this point. 4. Finally, reassemble everything in reverse order and your bike chain will be good as new!

How to Remove Bike Chain Without Master Link

If your bike chain doesn’t have a master link, then you’ll need to remove it using a chain tool. First, place the chain on the largest cog and line up the pin of the chain tool with one of the links. Apply pressure to push the pin out of the link.

Repeat this process until all of the links are disconnected. Once you’ve removed all of the links, you can take off the chain from your bike.

How to Remove Bike Chain from Derailleur

If you’re a bike enthusiast, then you know that one of the most important parts of your bike is the chain. The chain helps to transfer power from the pedals to the wheels, and it also helps to keep your bike in a straight line when you’re riding. However, there are times when you need to remove the chain from your bike, such as when you’re cleaning it or when you’re replacing it with a new one.

Here’s how to remove bike chain from derailleur: 1. First, shift your bike into its smallest gear so that there’s less tension on the chain. 2. Next, locate the derailleur cage and open it up so that you can access the chain.

3. Now use your hands to push thechain forward until it disengages from the teeth on the gears. You may need to use a little force to do this. 4. Once the chain is disengaged, carefully remove it from aroundthe derailleur cage and set it aside.

How to Remove Bike Chain With Master Link

Whether you’re a seasoned cyclist or a beginner, at some point you’re going to have to remove your bike chain. The most common reason for removing a bike chain is to clean it, but you may also need to replace a damaged link or shorten the chain. The good news is that removing a bike chain is relatively simple, and can be done with just a few tools.

The most important tool you’ll need is a chain breaker, which is used to push out the pins that hold the links together. You’ll also need a pair of needle nose pliers and maybe a hammer. If your chain has a master link, removing it is as easy as opening the link with your hands or pliers.

If your chain doesn’t have a master link, you’ll need to use the chain breaker to remove one of the pins holding the links together. Once thechainis off, cleaning it is simply a matter of soaking it in degreaser and then scrubbing it with an old toothbrush (or similar brush). To reassemble thechain , start by attaching one end to the front sprocket (if possible), then feedthe other end throughthe rear derailleur .

Finally, use either the master link or the chain breaker to reconnectthe two ends .

How to Remove Chain Link Without Tool

If you have a chain link fence that needs to be removed, there are a few options for doing so without using any tools. One option is to use a vehicle with a strong rope or chain attached to it. Another option is to use a come-along or winch.

Finally, you can also remove the posts by hand. The first step is to remove any barbed wire from the top of the fence. This can be done by either cutting it with pliers or by using a bolt cutter.

Next, loosen all of the bolts that connect the panels together. If possible, it may be helpful to label each panel as you go so that you can put them back in the same order later on. Once all of the bolts are loosened, start taking down the panels one by one.

If your fence has posts that are set in concrete, you will need to break up the concrete in order to remove them. This can be done with a sledgehammer or rented jackhammer. Start at one end of the post and work your way around until the entire post is free from its concrete base.

Bike Chain Removal Tool

Your bike’s chain is an essential component of your ride, and keeping it in good working order is crucial to maintaining peak performance. At some point, though, every chain will need to be removed for cleaning or replacement. And while this may seem like a daunting task, with the right tools and a little know-how, it’s actually quite easy!

There are a few different types of bike chain removal tool on the market, but the two most popular are the Park Tool Chain Whip and the Shimano TL-CN10. Both of these tools will do the job quickly and efficiently, so it really comes down to personal preference. To use either tool, simply place it on the chain near the rear cog (the smaller gear at the back of the drivetrain).

Then, using a wrench or socket driver, rotate the handle counterclockwise until the chain starts to loosen. Once it’s loose enough, you can remove it by hand. If you don’t have a bike chain removal tool handy, you can also use a length of strong rope or an old inner tube.

Just loop either around the rear cog and then pull on one end until thechain pops off. This method takes a bit more effort than using a purpose-built tool, but it’ll getthe job done in a pinch! No matter what method you use to remove your bike chain, be sure to clean and lubricate it before puttingit back on.

A clean and well-lubricated chain will last longer and perform better than one that’s neglected.

How to Remove Bike Chain Quick Link

If you’re like most cyclists, you probably don’t give your bike chain much thought – until it starts making strange noises or skipping gears. Then, it’s time to give it some attention. One of the most common issues with bike chains is a quick link that has come undone.

Quick links are a type of master link that makes it easy to remove and replace your chain without the need for special tools. If your quick link has come undone, don’t worry – it’s an easy fix. Just follow these steps:

1. Shift your bike into the smallest cog on the cassette (the gears on the back wheel). This will give you more slack in the chain so that you can easily remove it. 2. Use a pair of needle-nose pliers to grab onto one side of the quick link.

Squeeze the pliers together to open up the quick link enough so that you can slide out the chain. 3. Grab onto the other side of the quick link with your pliers and squeeze to close it up again. You may need to use a flathead screwdriver or something similar to help push the quick link closed; just be careful not to damage it in the process.

Once both sides are securely fastened, your chain should be as good as new!


If your bike chain has broken and you don’t have a bike tool to fix it, don’t worry! You can still fix your bike chain without a bike tool in just six steps. First, find the end of the broken chain.

Then, separate the two ends of the chain using your fingers or a pair of pliers. Next, align the two ends of the chain and reconnect them using a strong string or wire. Finally, use a pair of scissors to cut off any excess string or wire.

And that’s it! Your bike chain is now fixed without needing a bike tool.

Leave a Comment